Home > Model Code
 
a Model
RU
Roller Gear Index Unit  
b Size
80D
80D 80mm Center distance
c
Type
F
Type
S
Shaft Type
F
Flange Type
T
Table Type
A
Ultrathin Table Type
H
Oscillating Handler Type are available
d1
Number of Stops
08
8 stop Number of stops of the Indexing Drive
d2
Index Period
120
120° Cam rotation period (during which the output moves.)
e
Motion Curve
2
MS Curve
1
2
3
4
are available
1
MT(Modified Trapezoid)
2
MS(Modified Sine)
3
MCV 50(Modified Constant Velocity 50)
4
RBS(Rational B-Splines)
f
Hand of Cam
R
1Dwell Right Hand Cam Either a right hand cam or a left hand cam can be ordered as standard. Multi index (more than one index per cycle)are also available as standard.
Input
Output
R1
R2
R3
R4
Right Hand Cam
L1
L2
L3
L4
Left Hand Cam
  Right Hand cam Left Hand cam
1Dwell
R
L
2Dwell
R2
L2
3Dwell
R3
L3
4Dwell
R4
L4
g
Input Shaft Projection
s3
Both T and U surface
s1
s2
s3
s1
Only T surface side
s2
Only U surface side
s3
Both T and U surface sides are available
h
Mounting Holes
VW
Mounting holes on surfaces V and W come automatically. In addition, mounting holes on the other surfaces are availables as standard.
(Code A for all surfaces.)
i
Mounting Position
1
Mounting position as shown below.
j
Special Instructions
X
Include the symbol "X' in case of special instructions.
Standard(No Symbols)
x
Special Instructions
Optional Order How to Order
A.Hollow Output (which is available on sizes 45D through 250D)
Hollow output is used to connect the electrical cables are pneumatic tubing.
Advise required hole diameter.
If none is specified, solid output will be supplied.
  • Mounting holes supplied on surfaces V and W come automatically. Upon request, the mounting holes can be placed on the surfaces R,S,T and U.
  • Model code shows the assembly of cam and turret, together with output, input, tapped hole surface and mounting position.
  • Completion of the moedl code is necessary when placing an order. Either right hand cam or left hand cam can be ordered as standard. Also, four(4) types of motion curves (MT, MS, MCV50, RBS) can be orderd as standard.
  • ds
    Shaft Model
    df
    Flange Model
       
     
     
        No.30, Xingsi Rd., Chenwu, Wusha Community, Changan Town, Dongguan, China
    Tel : 86-0769-8535-4558 | Fax : 86-0769-8535-4535
    web : http://www.dgxingtong.com | E-mail : china@dgxingtong.com